User Guide
User Guide
User Guide

Mirror


Use it!

Used to mirror an element(s).

Tool SettingEffect
Mirror About

Sets direction in which element(s) are mirrored:

  • Horizontal
  • — about horizontal axis.
  • Vertical
  • — about vertical axis.
  • Line
  • — about line defined by two data points.
Make Copy

If on, the element(s) are copied and the copy(s) mirrored; the original(s) are not manipulated.

Mirror Text

If on, text is mirrored.

Mirror Multi-line Offsets

If on, multi-line profile offsets are mirrored.

Use Fence

If on, the fence contents are mirrored. The option menu sets the Fence (Selection) Mode.

To mirror an element(s)
  1. Select or fence the element(s).

  2. Select the Mirror tool.

  3. Enter a data point.
    If Mirror About is set to Horizontal or Vertical, the element(s) are mirrored.
    If Mirror About is set to Line, this data point defines one point on the mirroring line.

  4. If Mirror About is set to Line, enter another data point to define another point on the mirroring line.
    The element(s) are mirrored. You can go back to step 3 to mirror the element(s) again.

Alternative Method — To mirror an element(s)
  1. Select the Mirror tool.

  2. Identify the element.

  3. Follow steps 3 and 4 above.

    Mirror tool. Clockwise from top left: Mirror About Horizontal, Vertical, and Line. Mirror Text is on.

      

Key-in: MIRROR ICON


or

Key-in: [FENCE] MIRROR [COPY | ORIGINAL] [HORIZONTAL | LINE | VERTICAL]