Reference Guide
Reference Guide
Reference Guide

Grid

Consists of controls that are used to set Grid Lock and the grid's spacing and configuration.

Grid category controls

  

Grid Lock

If on, each data point is forced to lie on the grid.

Key-in: LOCK GRID [OFF | ON | TOGGLE]

If the optional argument is omitted, the current setting is toggled.

Conflicts between Grid Lock and Axis Lock are resolved as follows:

  • If the (Axis) Start Angle and (Axis) Increment are such that the grid does not align with an axis, Axis Lock nullifies Grid Lock.

  • If the axis anchor point is off the grid and the axis start angle and increment are such that grid points do not lie on an axis, Grid Lock is applied, followed by Axis Lock.

Unit Lock nullifies Grid Lock if the (Unit) Distance is greater than the distance between grid points.

Grid Lock can also be set in the Locks dialog box along with Axis Lock, Axis Start Angle, Axis Increment, Unit Lock, and Unit Distance. The Locks dialog box is opened by choosing Locks > Full from the Settings menu.

Grid Master

Sets the distance, in working units, between horizontal grid points in an orthogonal grid.

Key-in: ACTIVE GRIDUNIT <mu:su:pu>


or

Key-in: GU= <mu:su:pu>

Grid Reference

Sets the distance between grid references expressed as a multiple of Master/Grid.

Key-in: ACTIVE GRIDREF [units]


or

Key-in: GR= <units>

Grid Config(uration)

Sets the grid configuration:

Configuration

Grid points aligned

Ortho(gonal)

Orthogonally

Isometric

Isometrically
see footnote 174

Offset

Grid rows are offset by half the distance between horizontal grid points

Key-in: ACTIVE GRIDMODE [ISOMETRIC | OFFSET | ORTHOGONAL]

Grid Aspect (Y/X)

Sets the ratio of the vertical (Y) distance between grid points to the horizontal (X) distance between grid points.

Aspect Ratio (Y/X) is disabled if the Configuration is Isometric, because the aspect ratio is fixed in an isometric grid.

Key-in: ACTIVE GRIDRATIO <aspect_ratio>

To configure a grid to lie at a 45° angle, set Configuration to Offset and set Aspect Ratio to 0.5.

Orientation

Sets the orientation of the grid.